|
|
|
|
Decal Tutorial
Before
applying the decal on your vehicle you have to prepare
the following items:
towel, squeegee, ruler for measurement, water spray
or slippery solution and masking tape(Not necessary
if the masking tape is included in the decal). |
|
|
 |
Step One |
Decide where
do you want to apply your decal. Measure and adjust the
space to see whether you like the exact location or not.
Clean your vehicle part where you want the decal place
on. |
|
 |
Step Two |
Tear off the
masking tape together with the decal's graphic and exposing
the adhesive.
|
|
 |
Step Three |
Use water
or slippery solution to spray the adhesive side of the
decal.
Then apply the adhesive side of the decal to the surface.
Now you can make adjustment
on the decal and surface without damaging it.
|
|
 |
Step Four |
Use a squeegee
to scratch over the decal. Repeat this a few times until
you
remove most of the water or slippery solution between
the decal and the surface.
Wait for 1 to 2 hours or use a dryer to blow on the decal.
You can remove the masking tape from the decal by pulling
it straight away.
|
|
|
| |
|
© Copyright of motorsticker.com |
