Rim Striping MotoGP Repsol

Product information Rim striping MotoGP Repsol

This is the rimstriping MotoGP Repsol. That's MotoGP striping like you're used to, but in the colors of REPSOL. For this version we use red, white and orange. It is not printed on white or transparent film, all striping is actually cut out of a colored film. This method provides a very professional look. Do you prefer one color only? Go for rim striping MotoGP.

The striping consists of 3 7mm wide parts for each side of each wheel. A diagonal piece is cut out of each part of the striping. The stickers fit every motorcycle with 7mm wide rims or bigger.
The striping is easy applicable, for there are provided with application tape. Watch the instruction video below and find out how easy it is to apply the stripes properly and quickly.

Does you motorcycle have a wheel size different from 17 inch? Please notify us through the comments when you order.
Do you want more information? Please contact us!

WHAT COMES WITH THIS SET RIM STRIPING MOTOGP Repsol? One set rim striping MotoGP Repsol provides striping for both sides of both wheels. You will receive 4 stripes per color: one for each side of each rim. If you need a spare stripe in one of the colors, please send us an e-mail.

Application instructions Rim striping MotoGP Repsol

1. Place your motorcycle onto paddock stands, so the wheels can rotate freely.
2. Degrease the rim with a soft cloth. Make sure to remove any dust or grease.
3. Cut the stripes with a sharp pair of scissors.
4. Apply the first part to the edge of the rim (notice the difference between the right and left side).
5. Keep a 5-6cm distance between the 3 parts.
6. Repeat on the remaining rims.
7. Take a few steps back, have a look at your motorcycle and enjoy the fantastic result!

Tip to improve adhesion: Directly after applying the striping, shortly heat it with a heat gun or hair dryer.

Instruction video Rim striping MotoGP Repsol